Dab Operations - JVC UX-DM9DB Instructions Manual

Remote control
Number
buttons
REPEAT
DAB/FM/AM
Main unit
What is DAB system?
DAB (Digital Audio Broadcasting) is one of the digital radio
broadcasting systems available today. It can deliver digital
quality sound without any annoying interference or signal
distortion. Furthermore, it can carry text, pictures and data.
In contrast to FM broadcast, where each program is
transmitted on its own frequency, DAB combines several
programs (called "services") to form one "ensemble."
"Primary services" (main radio stations) are sometimes
accompanied by "secondary services" to broadcast
additional programs.
frequency
ensemble
12B (225.65MHz)
service 1
service 2
service 3

DAB Operations

DISP/
CHARA
SET
PTY
SEARCH
4,¢
TA/News/Info
ENSEMBLE
SEARCH
< >
,
DAB/FM/AM/AUX
4, ¢
ENSEMBLE SEARCH
ensemble
12C (227.36MHz)
Caution:
Electrostatic discharge from your body may cause noise
from the speakers and you cannot hear the broadcast.
If this happens, turn off the System (on standby), then turn
it on again.
Listening to a Service
1
Select "DAB" as source.
DAB
AUX
• When you change the source to DAB for the first time
after plugging in the power cord, the System
automatically scans the DAB bands for available
ensembles (see page 19).
2 Select an ensemble.
ENSEMBLE SEARCH
You can choose from the ensembles found by the
ensemble scanning.
• To choose from all the ensembles, see "To tune in to all
the ensembles" on page 19.
3 Select a service (either primary or secondary) you
want to listen to.
Ex.
L-B: Lights while receiving an ensemble in L-Band.
B : Lights while receiving an ensemble in Band III.
• When you reach the last/first service of an ensemble,
you can also skip to the next/previous ensemble by
pressing x/4. It may take some time to change
ensembles.
• When the signal is strong enough, the TUNED indicator
lights on the display.
FM
AM
18