JVC UX-DM9DB Instructions Manual page 32

3 Select the Recording Speed.
REC SPEED
NORMAL
REC SPEED
Record at same speed as of usual
REC SPEED
playback. The NORMAL indicator
NORMAL
lights.
Record at a speed of 8 times* the normal
REC SPEED
speed. The HIGH indicator lights.
HIGH
* Some discs may be recorded at a speed of 4 to 5 times
the normal speed.
• For MP3/WMA/WAV track:
– Even if you select "REC SPEED HIGH," the tracks
are recorded at the same speed as of usual playback.
– The tracks are recorded in analog recording.
• When "REC SPEED HIGH" is selected, you cannot
hear playback sounds while recording.
• For some discs, vibration noise is heard while recording
with "REC SPEED HIGH." It is not a malfunction.
• When you record tracks using "REC SPEED HIGH,"
the tracks may not be recorded correctly and the noise
may be recorded. In this case, record the tracks using
"REC SPEED NORMAL."
4 Select the recording device.
To record onto built-in
memory:
(on the main unit)
• If you try to record from a duplicated CD-R or CD-RW
onto the built-in memory or USB device, "SCMS
CANNOT COPY" appears on the display and you
cannot continue the recording procedure any further. In
this case, select "REC SPEED NORMAL" in the step 3
and press and hold MEMORY REC V or USB REC V
for more than 4 seconds to show "ANALOG REC?" on
the display.
Press the button again to start analog recording of the
tracks.
HIGH
To record onto USB
device:
(on the main unit)
5 Select the group to record tracks into.
• When you make a new group for the tracks:
1 Select "FORM GR ?" mode.
2 Make a new group.
Ex. When a 5th group is made
• The first new group you make is displayed as the
2nd group because the root of the target device is
recognized as the 1st group.
• You can enter the title of the new group in this step.
See "Entering Titles" on page 35.
3 Start recording.
• When you select an existing group to record tracks
into:
1 Select a desired group.
• See also page 10.
2 Start recording.
To record onto built-in
memory:
(on the main unit)
• When you want to record into the root group (G1
MUSIC) of the recording device:
To record onto built-in
memory:
(on the main unit)
Both recording and playback start at the same time. The REC
indicator corresponding to the target device lights.
When playback finishes, recording also stops.
To record onto USB
device:
(on the main unit)
To record onto USB
device:
(on the main unit)
28