Display Messages For Recording/Editing Operations - JVC UX-DM9DB Instructions Manual

Display Messages for Recording/Editing Operations

Display messages Possible cause and Solutions
• Change the USB connection mode to "MSC" (see page 10).
CANNOT EDIT
CHANGE MSC
• You cannot edit the connected USB device.
CANNOT EDIT
MTP DEVICE
• You cannot erase a track. (The data may be corrupted.) Turn the System off, then on again.
CANNOT ERASE
• The USB device is write-protected.
• You cannot make a group. (The data may be corrupted.) Turn the System off, then on again.
CANNOT FORM
GROUP
• You cannot move a track. (The data may be corrupted.) Turn the System off, then on again.
CANNOT MOVE
• The USB device is write-protected.
• The file is unplayable.
CANNOT PLAY
• While in Random Play or Group Random Play, you cannot move tracks between built-in memory
CANNOT REC
and USB device.
• You cannot record tracks from an iPod to a USB device.
• Change the USB connection mode to "MSC" (see page 10).
CANNOT REC
CHANGE MSC
• You cannot record on the connected USB device.
CANNOT REC
MTP DEVICE
• You cannot record tracks using "REC SPEED HIGH." Select "REC SPEED NORMAL" (see
CANNOT REC
page 28).
NORMAL ONLY
• You cannot edit the title of a track. (The data may be corrupted.) Turn the System off, then on
CANNOT TITLE
again.
• The built-in memory or the memory on the USB device is full.
DATA FULL
• The USB device is write-protected.
Continued on the next page
46