Recording Operations - JVC UX-DM9DB Instructions Manual

Remote control
7
GROUP SKIP
CD 6
REPEAT
HQ/SP/EP
REC SPEED
Main unit

Recording Operations

DISP/
CHARA
SET
ENTER
4,¢
USB 6
MEMORY 6
MARKING
MODE
CD #/8
MEMORY #/8
USB #/8
7, 4, ¢
USB REC ¶
MEMORY REC ¶
Before You Start Recording
IMPORTANT:
It should be noted that it may be unlawful to re-record
pre-recorded tapes, records, or discs without the
consent of the owner of copyright in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, musical, or artistic work embodied
therein.
• The recording level is not affected by the volume.
• Active Hyper Bass Pro, tone adjustment or sound mode
effect (see page 13) does not affect recordings.
• You can record up to 999 tracks to the built-in memory or
USB device. If you try to record a track after recording 999
tracks, "TRACK FULL" appears on the display and the
track will not be recorded.
• The tracks recorded on the built-in memory or a USB
device are converted into MP3 format.
• When you record an MP3/WMA/WAV track from a disc
into the built-in memory...
– If the file name of the track can be displayed on the
System, the title of the recorded track is copied from the
original file name and the extension of ".MP3" is added.
– If the file name of the track cannot be displayed on the
System or the file name does not exist, the recorded track
is titled "track.MP3."
• When you record tracks from a USB device to the built-in
memory, the tracks are moved to the built-in memory and
the tracks on the USB device are deleted.
• You cannot record WMA-DRM (Digital Rights
Management) tracks from a USB device to the built-in
memory.
• When you record tracks from the built-in memory to a USB
device, the tracks are moved to the USB device and the
tracks on the built-in memory are deleted.
• When you record the tracks from an iPod or a portable
audio device, the System starts synchronized recording
with the incoming sound signals. When no sound signal
comes from an iPod or a portable audio device for 30
seconds, the System stops recording automatically and
adds a 2-second blank to the end of the recorded track.
• You cannot start recording or moving tracks into a USB
device while "USB READING" is shown on the display.
• Some USB devices have a limit for recordable track
number in the root group. Select another group or make a
new group to record/move tracks into when the number of
target tracks reaches the limit.
• Do not disconnect a USB device while playing/recording/
editing. It may cause malfunction.
• When you record a DAB service, a service is recorded in
analog format.
26