Advanced Radio Operations; Receiving Fm Stations With Radio Data System; Searching For A Program By Pty Codes - JVC UX-G950V Instructions Manual

Remote control
Receiving FM Stations with Radio
Data System
Radio Data System allows FM stations to send an additional
signal along with their regular program signals.
This System can receive the following types of Radio Data
System signals.
Shows commonly known station
PS (Program
Service) names.
PTY (Program Shows types of broadcast programs.
Type)
Shows text messages the station
RT (Radio Text)
sends.
Provides information about the
Enhanced Other
Networks types of the programs broadcast by
the Radio Data System stations of
the different networks.
To show the Radio Data System information
While listening to an FM station...
(Non-Radio Data System signal)
PS Station names are displayed. "NO PS" will appear
if no signal is sent.
PTY The broadcast program type is displayed.
"NO PTY" will appear if no signal is sent.
RT Text messages the station sends are displayed.
"NO RT" will appear if no signal is sent.
19

Advanced Radio Operations

Remote
ONLY
Frequency
Searching for a Program by PTY
Codes
You can locate a particular kind of program from the preset
channels (see page 9) by specifying the PTY codes.
To search for a program using the PTY codes
1
While listening to an FM station...
2
Select a PTY code (see page 20).
3
Start searching.
Ex.: When "NEWS" is selected
The System searches for 30 preset FM stations, stops
when it finds the one you have selected, and tunes in to
that station.
• If no program is found, "NOTFOUND" appears on
the display.
• To stop searching any time during search, press
PTY SEARCH.
To continue searching after it stops on an unwanted station
While the indications on the display are flashing, press
PTY SEARCH again.
Remote
ONLY