JVC UX-DM9DB Instructions Manual page 37

To move the tracks in the programmed order
• Even if a track is programmed twice or more, the track is
transferred only once.
• After moving the tracks onto the target device, the original
tracks are deleted from the original device, and the
following tracks in the original device are re-numbered
automatically.
1 Program desired tracks.
• See "To program the playing order of tracks on the
built-in memory and USB device" on page 22.
2
Start Program Play.
3 Select a target device to move tracks onto.
When moving the tracks
onto built-in memory:
(on the main unit)
4 Confirm the selection.
When moving the tracks
onto built-in memory:
(on the main unit)
Ex. When moving tracks to USB device
5 Select the group to move the tracks into.
• When you make a new group:
1 Select "FORM GR ?" mode.
Ex. When moving tracks to USB device
2 Make a new group.
Ex. When a 5th group is made
• The first new group you make is displayed as the
2nd group because the root of the target device is
recognized as the 1st group.
• You can enter the title of new group in this step. See
"Entering Titles" on page 35.
33
When moving the tracks
onto USB device:
(on the main unit)
When moving the tracks
onto USB device:
(on the main unit)
3 Start moving the tracks.
• When you select an existing group:
1 Select a desired group.
• See also page 10.
2 Start moving the programmed tracks.
When moving the
tracks onto built-in
memory:
(on the main unit)
• When you want to move the tracks into the root
group (G1 MUSIC) of the target device:
When moving the tracks
onto built-in memory:
(on the main unit)
When the transfer starts, "MOVE START" appears and the
progress is shown by "%" on the display.
After the progress indication become 100%, "WRITING"
flashes on the display.
When "WRITING" goes off, the transfer is completed, and
Program Play is canceled.
When moving the
tracks onto USB
device:
(on the main unit)
When moving the tracks
onto USB device:
(on the main unit)