Security Tronix ST-IP4FB Quick Start Manual page 35

Steps:
1. Access the camera through web browser. Refer to Chapter 4.
2. Enter platform access configuration interface: Configuration >
Network > Advanced Settings > Platform Access
Figure 5-2
3. Select Platform Access Mode as Guarding Vision.
4. Check the checkbox of Enable.
5. Click and read "Terms of Service" and "Privacy Policy" in pop-up
window.
6. Create a verification code or change the verification code for
the camera.
Note:
The verification code is required when you add the camera to
STGO2 app.
7. Save the settings.
ST-IP4FB·Quick Start Guide
Guarding Vision
dev.guardingvision.com
Platform Access Configuration (Web)
34