Security Tronix ST-IP4FB Quick Start Manual page 16

No. Description
1 Mounting Base
2 Back Case
3 Front Case
4
5 Sun Shield
This type of bullet camera supports PoE power supply. You can

power the camera by connecting both DC 12V interface and the
Ethernet interface. Or you can connect the Ethernet interface
only.
Press and hold the reset button about 10s when the camera is

powering on or rebooting to restore the default settings, including
the user name, password, IP address, port No., etc.
ST-IP4FB·Quick Start Guide
Table 1-3
Lens
Description
No.
6 Grounding Screw
10/100M Self-adaptive
7
Ethernet Interface (PoE)
8 Power Supply (DC 12V)
9 Memory Card Slot
10
15
Description
Reset Button