Unit Group - YOKOGAWA TA520 User Manual

3.22 TVARiation Group/3.23 UNIT Group
TVARiation:VERTical:CENTer
Function Sets the center value of the vertical axis or
queries the current setting.
Syntax :TVARiation:VERTical:CENTer <Time>
:TVARiation:VERTicalCENTer?
<Time>=50 ns to 20 ms (in 25 ps steps)
Example :TVARIATION:VERTICAL:CENTER 100ns
:TVARIATION:VERTICAL:CENTER?
→:TVARIATION:VERTICAL:
CENTER 100.000E-09

3.23 UNIT Group

The commands in this group deal with the default units of voltage, time, and frequency.
:
:UNIT
UNIT?
Function Queries the default units for voltage, time, and
frequency.
Syntax :UNIT?
Example :UNIT?
→:UNIT:FREQUENCY HZ;VOLTAGE V;TIME S
UNIT:VOLTage
Function Sets the default unit for voltage or queries the
current setting.
Syntax :UNIT:VOLTage [<auxiliary unit>]V
:UNIT:VOLTage?
<multiplier> See section 2.4.
Example :UNIT:VOLTAGE V
:UNIT:VOLTAGE?
→:UNIT:VOLTAGE V
UNIT:TIME
Function Sets the default unit for time or queries the
current setting.
Syntax :UNIT:TIME [<auxiliary unit>]S
:UNIT:TIME?
<multiplier> See section 2.4.
Example :UNIT:TIME s
:UNIT:TIME?
→:UNIT:TIME S
3-58
;
VOLTage <Space>
TIME <Space>
TVARiation:VERTical:SPAN
Function Sets the width of the vertical axis or queries the
current setting.
Syntax :TVARiation:VERTical:SPAN <Time>
:TVARiation:VERTical:SPAN?
<Time>= 500 ps,1 ns,2.5 ns,5 ns,10 ns,
Example :TVARIATION:VERTICAL:SPAN 200ns
:TVARIATION:VERTICAL:SPAN?
→:TVARIATION:VERTICAL:SPAN 0.2E-06
< Multiplier >
< Multiplier >
V
?
< Multiplier >
< Multiplier >
S
?
?
20 ns,.....,2 ms,5 ms,10 ms,20 ms
V
S
IM 704310-12E