Table of Contents
Advertisement
Code Message
168
Block data not allowed
171
Invalid expression
178
Expression data not allowed.
181
Invalid outside macro definition The place holder is outside the macro.
Error in communication execution (200 to 299)
Code Message
221
Setting conflict
222
Data out of range
223
Too much data
224
Illegal parameter value
241
Hardware missing
260
Expression error
270
Macro error
272
Macro execution error
273
Illegal macro label
275
Macro definition too long
276
Macro recursion error
277
Macro redefinition not allowed
278
Macro header not found
IM 704310-12E
Action
<BLOCK DATA> cannot be used.
<EXPRESSION DATA> contains invalid characters.
Equations cannot be used.
<EXPRESSION DATA> cannot be used.
Equations cannot be used.
Macro functions of IEEE488.2 are not supported.
Action
There is a conflict in the setting.
Check the relevant settings.
The data value is out of range.
Check the range.
The data byte length is too long.
Check the data byte length.
The parameter value is invalid.
Check the range.
The hardware is not installed.
Check the existence of the option.
<EXPRESSION DATA> are invalid.
Equations cannot be used.
Too many macro nests.
Macro functions of IEEE488.2 are not supported.
Cannot be used in a macro.
Macro functions of IEEE488.2 are not supported.
The macro label is invalid
Macro functions of IEEE488.2 are not supported.
The macro is too long
Macro functions of IEEE488.2 are not supported.
Macro recursion occurred.
Macro functions of IEEE488.2 are not supported.
Macro redefinition is not allowed.
Macro functions of IEEE488.2 are not supported.
No such macro is defined.
Macro functions of IEEE488.2 are not supported.
Appendix 2 Error Messages
Reference Page
2-6, Chap. 3
Chap. 3
Chap. 3
Reference Page
Chap. 3
Chap. 3
Chap. 3
Chap. 3
App-3
App
Advertisement
Table of Contents
