YOKOGAWA TA520 User Manual page 9

1.3 GP-IB Interface Functions and Specifications
GP-IB Interface Specifications
1-4
Electrical and mechanical specifications : Conforms to IEEE Standard 488-1978.
Mechanical specifications
Code
Mode
Address setting
Remote mode clear
Mechanical Specifications
Function
Source handshaking
Acceptor handshaking
Talker
Listener
Service request
Remote local
Parallel poll
Device clear
Device trigger
Controller
Electrical characteristic
: Refer to the table below.
: ISO (ASCII) code
: Addressable mode/Talk-only mode (switched
automatically)
: Addresses 0 to 30 can be selected from the
GP-IB setting menu, which is displayed when
you press [GP-IB] soft key after having pressed
the UTILITY key.
: Remote mode can be cleared by pressing the
LOCAL key (SHIFT+AUTO SCALE key).
However, this is not possible if Local Lockout
has been set by the controller.
Subset Name Description
SH1 Full source handshaking capability
AH1 Full acceptor handshaking capability
T6 Basic talker capability, serial polling,
untalk on MLA(My Listen Address), No
talk-only capability
L4 Basic listener capability, unlisten on MTA
(My Talk Address), no listen-only capability
SR1 Full service request capability
RL1 Full remote/local capability
PP0 No parallel polling capability
DC1 Full device clear capability
DT0 No device trigger capability
C0 No controller function
E1 Open collector
IM 704310-12E