Snmp Trap Settings Display - Omron NJ501-1300 User Manual

5-6

SNMP Trap Settings Display

SNMP Trap
Setting
SNMP trap
Port No.
*
Trap 1
Setting
Specifying method
IP address
Host name
Community name
Version
NJ-series CPU Unit Built-in EtherNet/IP Port User's Manual (W506)
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
Description
Specify whether to use the SNMP trap (network error detec-
tion). If the SNMP trap service is not used, SNMP traps are not
sent to the SNMP manager.
Set the port number to use to connect to the SNMP server. It is
normally not necessary to change this setting.
Description
Set the specifying method for the SNMP manager destination
for SNMP traps.
• IP address
• Host name
Set the IP address of the SNMP manager. (Set this setting if
the specifying method in the trap 1 settings is set to the IP
address Option.)
Set the host name of the SNMP manager. (Set this setting if
the specifying method in the trap 1 settings is set to the Host
name Option.) (You can use up to 200 single-byte alphanu-
meric characters, dots, and hyphens with up to 63 single-byte
alphanumeric characters between dots.)
Set the community name. (You can use up to 255 single-byte
alphanumeric characters.)
Set the version of the SNMP manager.
• SNMP version 1: SNMPv1
• SNMP version 2C: SNMPv2C
Default
Do not use.
5
162
Default
IP address
None
None
public
SNMPv1
5-9