Color Editor - Naigon Electronic Spark Color SC2-R3 Setup Manual

In Spark Color 2™ a new Saber Configuration menu is available. To access this menu, when in the idle mode hold
down the aux button while the saber is pointing down. From here the two configuration modes can be accessed,
along with jumping back into the main idle mode of Spark Color 2™.
Once inside the menu the following interaction is possible.
Entry Label
Aux Button AUX +/-
Main Button MAIN +/-
6.5.

COLOR EDITOR

The Color Editor is an exciting new mode that allows editing of all the colors for every font on the saber. This
allows easy adjusting of colors selected from the Config Editor, and it even allows completely swapping the colors
without having to remove the SD card!
6.5.1. COLOR EDITOR MENU
The color editor has a menu similar to the menu in Igniter™. This menu is used to navigate the fonts to select the
one to edit.
Entry Label
Aux Button AUX +/-
Main Button MAIN +/-
Aux Button AUX +/-
Aux Button AUX +/-
6.5.2. COLOR EDITOR EDITING
Once a font is selected the Color Editor is in editing mode for that font. From here all the changes can be made.
Entry Label
Aux Button AUX +/-
Aux Button AUX +/-
Swing saber NA
Rotate saber NA
Hit saber/Blade CS
Main Button MAIN+/-
6.6. MOTION EDITOR
Action Description
Press Advances to the next mode. The three possible modes are
Color Editor, Motion Editor, and Spark Color 2™ (main
firmware).
Press/Latch Enter the current mode.
Action Description
Press Advances to the next color set.
Press/Latch This button will activate the saber for editing.
Hold Plays the instructions.
Hold + point Returns to the Saber Configuration menu.
saber down
Action Description
Press Increments/decrements the current color value by 10.
Hold Changes between incrementing and decrementing.
Swing + hold Change the action being edited between: Blade, Clash, and
aux button Blast.
Rotate Rotating the saber will change between the colors blue,
green, and red.
Clash Increments/decrements the current color by 1.
Hold/Unlatch Holding or unlatching the main button will cause the
retraction sound to play and all changes made to this font will
be saved to disk.
Page | 31