Launching The Application - Naigon Electronic Spark Color SC2-R3 Setup Manual

Now, with both the Saber1 empty directory open and the micro SD card opened, select all the files from the micro
SD card, and drag them into the Saber1 directory. When done, all the files should be copied to your hard-drive as
shown below.
Figure 12 – After creating a new directory called "c:\Igniter\Saber1", the files are copied from the micro SD card (on the right) to the new
Saber1 folder (on the left). From here edits can be made to the files from the config editor.
5.3.

LAUNCHING THE APPLICATION

To launch the config editor, you can use either the desktop shortcut that was created, or you can use the shortcut
from the Start Menu. Once launched you should see the program as below:
Page | 17