Copy Files Back To The Micro Sd - Naigon Electronic Spark Color SC2-R3 Setup Manual

Figure 22 - Using SD Formatter to format the micro SD card for use with any of my products, including Spark 2™, Spark Color 2™, Igniter 2™,
To format an SD card, simply select the drive of the micro SD card from the Select card dropdown, type a name
into the Volume label field, ensure Quick Format is chosen, and hit format, clicking yes on the prompt that
appears. This will format the card and erase the existing contents, ensuring it is ready for use with your board.
Note that I do this for every card that gets sent with the board, but this is necessary for those that are changing
fonts and/or have a new SD card.
5.7.

COPY FILES BACK TO THE MICRO SD

To copy the files back, simply move all the files from the "c:\Igniter\Saber1" directory to the root of the micro SD
card ONE FOLDER AT A
Spark Color 2™. If you try to copy everything at once they may get written in an incorrect order on disk and access
times can suffer, causing a jerky experience. Once this step is done the micro SD card is ready to be loaded back on
to Spark Color 2™ to enjoy the new settings and fonts!
6. SABER OPERATION
and Sound Hornet™.
TIME. This will ensure that the files are written well and can be accessed quickly by
Page | 28