Blade Color - Naigon Electronic Spark Color SC2-R3 Setup Manual

Figure 18 – The Blade Effects tab in the Config Editor contains settings for the blade plusing along with the extension and retraction lenghts.
The values for INLEN and OUTLEN set the length of the blade effect for retraction and extension respectively.
Setting these to 0 will auto-detect the length of the sound file and match the blade length to the file, allowing for
varying file lengths to work perfectly!

5.5.3. BLADE COLOR

A unique feature for Spark Color 2™, this tab contains the ability to edit each color set.
First, use the dropdown to select the desired color set to edit. Once chosen, the sliders for the blade color, clash
color, and blast color are loaded. Then, modify each C1, C2, C3, and optionally C4 to match the blade color mix.
Assuming the standard RGB color scheme and that C1 is Blue, C2 is Green, and C3 is red, you can use a site like
colorschemer.com to find colors and enter them into the tool.
If you want to add a new color set just go to the file explorer, copy the colr1 folder, rename it to colrN (where N is
2-9) to the next available number, and then switch back to the Config Editor program.
Page | 24