Color Changing Crystal Wiring - Naigon Electronic Spark Color SC2-R3 Setup Manual

Figure 6 – Diagram with a small shaft-less rumble motor running off the C4- pad. In this application the C4- pad is like the Crystal pad of the
original Igniter™. Note that if more than 3.3v is required the power could be hooked to the battery directly. Also, note that the C4- pad can
only handle up to 2A.
4.5.

COLOR CHANGING CRYSTAL WIRING

With the advent of color mixing many people are wanting a blade matching crystal chamber to go along with their
build. If you want to experience this thrill, then look no further! The following diagram shows how to get this LED
wired and working.
Page | 11