Table of Contents
Advertisement
SECOCQ7-mITX2.0
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
3.1 Connectors placement - Overview
In the following picture, it is shown the connectors placement of SECOCQ7-mITX2.0 carrier board.
Standard connectors are placed on the same side of PCB, so that it is possible to place them on a
panel of an eventual enclosure.
PLEASE BE AWARE THAT, DEPENDING ON THE CONFIGURATION YOU PURCHASED, THE
APPAREANCE OF YOUR BOARD COULD BE SLIGHTLY DIFFERENT FROM THE FOLLOWING
ONE.
ATX Power
Front Header
Connector
interface
RTC Battery
holder
mSATA slot
USB2.0 ports
#6-7 Pin Header
Feature
connector
USB2.0 ports
#4-5 Pin Header
I2C EEPROM
Socket
I2C + I2S Pin
Header
FAN
connector
SATA
connector
USB3.0 or
Gigabit Ethernet
USB2.0
+ Dual USB 2.0
connector
Power On
Display
button
EEPROM Socket
USB Client
HDMI + optional
connector
Display Port
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
LCD (LVDS/eDP)
Reset
connector
button
CAN + RS-232
Triple Audio Jack
DB9 connectors
Page 15
LPC
Pin Header
Backlight
connector
Manufacturer
connector
SPI
Pin Header
SPI Flash
socket
PCI-e x4
interface
Qseven camera
interface
External camera
interface
CSI interface
nd
2
Audio
interface
S/P-DIF
connector
SD/MMC Slot
Advertisement
Table of Contents
