Msata Slot - Seco SECOCQ7-mITX2.0 User Manual

SECOCQ7-mITX2.0
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.

3.3.14 mSATA Slot

To increase mass storage possibilities, it is possible to use mSATA Solid State Disks, using the
dedicate connector, CN22, which is a standard 52pin miniPCI Express connector, type JAE MM60-
52B1-E1-R650 or equivalent, H=5.9mm, with the following pinout:
mSATA Slot – CN22
Pin Signal
1 ---
3 ---
5 ---
7 ---
9 GND
11 ---
13 ---
15 GND
17 ---
19 ---
21 GND
23 SATA1_Rx+
25 SATA1_Rx-
27 GND
29 GND
31 SATA1_Tx-
33 SATA1_Tx+
35 GND
37 GND
39 +3.3V_S
41 +3.3V_S
43 ---
45 ---
47 ---
49 ---
51 mSATA_DET#
3.3.15 I2C EEPROM socket
In many applications it is useful to have a small non-volatile storage device, like an EEPROM..
For this purpose, connected to I2C bus, there is an 8-pin DIP socket p.54mm, type TE p/n 2-
1571552-2 or equivalent, with the following pinout:
I2C EEPROM socket – CN20
Pin Signal
1 A0
2 A1
3 A2
4 GND
Pin Signal
2 +3.3V_S
4 GND
6 ---
8 ---
10 ---
12 ---
14 ---
16 ---
18 GND
20 ---
22 ---
24 +3.3V_S
26 GND
28 ---
30 ---
32 ---
34 GND
36 ---
38 ---
40 GND
42 ---
44 ---
46 ---
48 ---
50 GND
52 +3.3V_S
Pin Signal
8 +3.3V_S
7 WP
6 GP0_I2C_CLK
5 GP0_I2C_DAT
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
Page 34