I Ntroduction - Seco SECOCQ7-mITX2.0 User Manual

SECOCQ7-mITX2.0
User Manual - Rev. First Edition: 1.0 - Last Edition: 1.0 - Author: S.B. - Reviewed by G.M.
2.1 Introduction
SECOCQ7-mITX2.0 is a carrier board, designed in mini-ITX form factor, intended for the use with
®
any Qseven CPU modules Rel. 2.0 compliant.
®
Qseven is a form factor, designed to minimise space consumption, since it integrates in only
70x70mm of space all core components of a common PC (CPU, RAM, Graphic, audio, etc...). All
the functionalities are made available through a standardised card edge connector, from which all
signals can be taken and carried to the appropriate external connector in the carrier board and/or
to other internal component, to implement more functionalities other than included in the standard
®
Qseven bus interface.
The connection to the Qseven
which is a proven high speed signal interface connector.
All the features implemented on SECOCQ7-mITX2.0 Carrier Board are implemented according to
®
Qseven standard (Rel. 2.0) bus interface, so the board can be used with any Qseven
without incompatibilities and/or loss of functionalities.
Anyway, this carrier board is specifically designed to take advantage of all features introduced with
latest release of Qseven
I2S interface, also keeping the compatibility with Qseven
The module also gives the opportunity of fixing both standard Qseven
factor μQSeven ®
modules.
The board can be used both as an evaluation module, to test the functionality of your Qseven
module and design an application specific carrier board for it, or as a complete carrier board,
already suited for standard purposes, with a reduced space consumption.
To learn more about Qseven
®
board is implemented through a standardised MXM connector,
®
specifications, such as 2 x USB 3.0 ports, dual embedded Display port,
®
standard: http://www.qseven-standard.org
Copyright © 2013 SECO S.r.l.
SECOCQ7-mITX2.0
®
modules Rel. 1.20 compliant.
®
modules and newest form
Page 9
®
module
®