Connectors Placement - Seco Qseven CQ7-A42 User Manual

3.1 Connectors placement

On CQ7-A42 carrier board, there are several connectors. Standard connectors are placed on the same side of PCB, so that it is possible to place them on a panel
of an eventual enclosure.
Please be aware that, depending on the configuration purchased, the appearance of the board could be different from the following pictures.
SATA Port
SATA Power SPI Interface
#1
Power In
Optional
backlight
Optional
Manufacturer
Optional
LVDS
Optional eDP
connectors
Battery
Holder
Qseven ®
connector
Optional RS-232/RS-
Gigabit
Gigabit 422/RS-485
Ethernet #0
Ethernet #1 DB9 port
CQ7-A42
CQ7-A42 - Rev. First Edition: 1.0 - Last Edition: 2.0 - Author: S.B. - Reviewed by G.G. Copyright © 2016 SECO S.r.l.
TOP SIDE
USB ports
#4÷#5 LPC Feature
header
HDMI or
USB ports
USB port #0
DP++
#2÷#3
connector
Switch/LED
GPIO header
header
FAN
RS-232
Serial #1
RS-232
Serial #2
Optional
Debug USB
CAN terminal
block
Audio
Interface
USB port #1
BOTTOM SIDE
mSATA slot
μSD +
miniPCI-e
miniSIM
slot
combo slot
19