Connecting To An Equotip 550 Touchscreen Unit - Proceq Equotip 550 Operating Instructions Manual

11.3

Connecting to an Equotip 550 Touchscreen Unit

Connect the Equotip 550 Touchscreen Unit to an USB port or connect
it to the Ethernet (DHCP server requried)., then select
data from the Equotip 550 Touchscreen Unit.
The following window will be displayed: Select the appropriate communi-
cation type. If connecting through Ethernet, please enter the instruments
IP address in the appropriate field. Click on "Next >".
When an Equotip 550 has been found its details will be displayed on
screen. Click on the "Finish" button to establish the connection
Measurement files and folders stored on the
Equotip Touchscreen will be displayed as shown
on the left.
Click on the measurement file to be transferred. If
multiple files have to be transferred, select them
while holding the "shift"or "ctrl" button, or click on
"Select All".
© 2016 Proceq SA
11.4 Connection to Portable Rockwell Probe
• Connect the Portable Rockwell probe to a PC using the provided
to download probe cable.
• Start the Equotip Link software, and click on the Portable Rockwell
icon to detect the Portable Rockwell probe. Click the "New" button
at the bottom of the screen.
• Select the hardness scale to be displayed (Hardness scales).
• Select the number of readings "n" per measurement series.
11.4.1 Viewing Data
The transferred measurements from your Equotip 550 will be displayed
on the screen:
Click on the double arrow icon in the first column to see more details.
11.5 Adjusting the Settings
"All settings, such as material group, scale, impact direction and both
limits can be changed afterwards in Equotip Link.
If the settings of multiple measurement series have to changed, select
each of them while holding the "shift" or "ctrl" button.

Table of Contents
43