Table of Contents
Advertisement
• Connect the USB-stick to the USB Device plug on the left side of the
Equotip Touchscreen
• Click on
and confirm with click on
• The uploaded images appear in the Images Explorer
NOTE! The USB stick must be either formatted in FAT or
FAT32. NTFS is not supported.
4.4.2
Report template explorer
The report templates can be managed here. Either the default template
can be used, or a fully customized template can be created and edited.
Templates can also be copied or exported to an USB stick.
4.4.3
Reporting via PDF
It's possible to create reports directly on the instrument as PDF and store
them on USB stick. Choose the measurement files in the data explorer of
which a report should be created, mark them by ticking the box. Tap the
button to create the reports. The report will be created with the se-
lected report template. Repeat this for each file. For each measurement
series there will be a separate PDF created.
NOTE! The report option is only visible if an USB stick is con-
nected to the instrument. The USB stick must be either for-
matted in FAT or FAT32. NTFS is not supported.
Optionally, also the project file can be exported to the USB stick. Here all
files will be included in one file.
4.4.4
Reporting via Equotip Link
Alternatively to create reports the PC-Software Equotip Link can be used.
For more details please refer to chapter "11. Equotip Link Software".
© 2016 Proceq SA
5.
Data (Explorer)
Figure 20: Data Explorer Menu
5.1
Measurements
5.1.1
Storing Measurements
If the auto close option is disabled or chosen number of impacts is not
reached, the series can be closed and saved manually by tapping the
store button
.
If the auto close option is enabled, the measurement series will be auto-
matically stored as soon as the chosen number of impacts is reached.
The name under which the series will be stored can be edited in the up-
per left corner.
Table of Contents
29
Hide quick links:
Advertisement
Table of Contents
