Headphone Socket - Roberts Revival mini Manual

Headphone socket

A 3.5mm Headphone Socket located on the rear of your radio is provided
for use with either headphones or an earpiece. Inserting a plug automati-
cally mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting the volume to a low level before connecting
headphones to the radio.
IMPORTANT: Excessive sound pressure from earphones and headphones
can cause hearing loss.
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
Auxiliary input socket
1. Connect a stereo or mono audio source (i.e. CD player, MP3 player,
etc.) to the Auxiliary input socket.
2. Press and release the On/Off control to switch on the radio. Press
and release the DAB/FM button until the display shows 'AUX IN'.
Note: that the Auxiliary Input mode can only be selected when a plug
is inserted in the socket.
3. Adjust the Volume control on your player and on the radio for comfortable
listening.
4. Remove the cable from the Auxiliary input socket or press and release
the DAB/FM button to cancel Auxiliary Input mode.
Service
Service
2
1
24