Roberts Revival mini Manual page 13

Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press and release the On/Off control to switch on your radio.
2. Press and release the DAB/FM button until the DAB mode is selected.
3. Press and hold the Info button. The DAB menu will show on the display.
4. Rotate the Tuning control until the display shows 'DRC'.
5. Press and release the Tuning control to enter the adjustment mode.
6. Rotate the Tuning control to select the required DRC setting (the
default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.
DRC 1 - DRC level is used as sent by broadcaster.
7. Press and release the Tuning control to confirm the setting. The
display will return to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
1
2
3
4-7
12