Configuration Menu - Avery Dennison ALS 330/430 User Manual

Operators Manual
ALS 330/430

6. Configuration menu

Adjustments in the configuration menu are necessary during installation of the machine only. In
the configuration menu, the required optional functions can be selected. Some service
support functions in the configuration menu will be useful for the service staff.
Possible adjustments:
Recognition of the product at the leading or trailing edge
Left or right hand version of labeller
Machine type
direct dispensing or several type of applicators
Parameters for the interface
Possible tests:
In/output test
Test run without labelling
The function Factory initialisation resets all parameters to default values.
Calling the configuration menu
There are two ways to call the configuration menu:
Press the key ENTER and switching on power at the same time. The display shows
'CODE'.
Press the keys NEXT and PRIOR at the same time when a parameter function is displayed.
The display shows 'CODE'.
The password has to be entered by pressing the following keys:
* 1 time
* 3 times
* 2 time
* 3 times
When the password is entered correctly, the display shows `DTST`. After pressing PRIOR or
NEXT the next menu, point will be shown. If a wrong password was entered, you go back to the
previous menu.
Release 4/06
PRIOR FUNCTION
NEXT FUNCTION
ENTER
NEXT FUNCTION
Page 43 Configuration menu