Operator Panel - Avery Dennison ALS 330/430 User Manual

Operators Manual
ALS 330/430

2.2 Operator panel

The operator panel (Figure 2) of the 330/430 is shown below, it has a 4 digit LED display and 4
membrane keys.
Figure 2 Operator panel
The 4 membrane keys have following functions:
FEED:
displays INIT pressing this key will start initialisation of the machine. An
initialisation has to be made each time a new material is used. If the FEED key is
pressed and held as the machine is turned on then the machine carries out an
automatic initialisation of the label parameters "CONT" and "LPIT".
PRIOR:
parameter. If the up arrow key is pressed and held as the machine is turned on
the product menu is selected.
NEXT:
function) parameter. If the down arrow key is pressed and held as the machine is
turned on the standard menu is selected.
Release 4/06
By pressing this key one label will be dispensed. When the machine
This key moves up the menu or increases the value of a (Prior function)
This key moves down the menu or decreases the value of a (Next
Page 13 Description