Station Number Setting - Toshiba AJ65VBTCU-68ADVN User Manual

4 SETUP AND PREPARATION BEFORE OPERATION

4.6 Station Number Setting

4.7 Facing Direction of the Module Installation
DIN rail
4 - 10
The station number setting of the AJ65VBTCU-68ADVN/ADIN determines the buffer
memory addresses of the master module where the remote I/O signals and read/write
data are stored.
For details, refer to the user's manual of the master module used.
The AJ65VBTCU-68ADVN/ADIN module may be installed in any of six orientations
using a DIN rail or CC-Link connector type fitting.
(There are no restrictions on the facing directions.)
Ceilling installation
Flat installation
Front installation
MELSEC-A
4 - 10