Table of Contents
Advertisement
3 SPECIFICATION
3.6.6 CH.
Digital output value (Address RWrn+0
3.6.7 Error code (Address RWrn+8
3 - 20
(1) The digital value after the A/D conversion is stored in the remote register address
from RWrn+0
to RWrn+7
H
(2) The digital output value is expressed in a 16-bit encoded binary.
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
b12 to b14 change to 1 when the sign is negative
(1 at b15) and to 0 when it is positive (0 at b15).
(A negative digital value is expressed in 2's complement.)
Sign bit
1: Negative
0: Positive
)
H
If an error occurs (the RUN LED flickers) when data is written to the AJ65VBTCU-
68ADVN/ADIN, the corresponding error code is stored into the remote register
(address RWrn+8
) of the AJ65VBTCU-68ADVN/ADIN.
H
Refer to Section 6.1 for details of the error codes.
to RWrn+7
H
H
for each channel.
H
Date section
MELSEC-A
)
3 - 20
Advertisement
Table of Contents
