Toshiba AJ65VBTCU-68ADVN User Manual page 76

5 PROGRAMMING
Changing of initial settings
Initial setting change
Processing at initial settings
Read of digital output values
Processing at error occurrence
Error reset
Write of remote output signals
The program enclosed by the dotted line is necessary only when the initial settings are changed.
5 - 13
MELSEC-A
Average processing
specification (RWw3)
Writes to master station
CH.2 average time,
number of times setting
(RWw5)
Writes to master station
Turns on initial data
processing completion
flag (RY18).
Turns on initial data
setting request flag
(RY19).
A/D conversion enable/
prohibit specification
(RWw0)
CH.1 to CH.4 input
range setting (RWw1)
Writes to master station
Average processing
specification (RWw3)
Writes to master station
CH.2 average time,
number of times setting
(RWw5)
Writes to master station
Turns on initial data
setting request flag
(RY19).
Turns off initial data
processing completion
flag (RY18).
Turns off initial data
setting request flag
(RY19).
Reads CH.1 digital
output value (RWr0).
Reads CH.2 digital
output value (RWr1).
Reads error code
(RWr8).
Turns on error reset
request flag (RY1A).
Turns off error reset
request flag (RY1A).
Y400 to Y41F are written
into RY00 to RY1F.
5 - 13