Toshiba AJ65VBTCU-68ADVN User Manual page 39

3 SPECIFICATION
3.6.4 Average processing specification (Address RWwm+3
3.6.5 CH. Average time/number of times setting (Address RWwm+4
3 - 19
(1) Selects between sampling processing and average processing selection and
when average processing is selected, the processing method is specified.
(2) The default is sampling processing on all channels.
b15 b14 b13 b12
CH.8 CH.7 CH.6 CH.5
Average processing
channel specification
1: Average processing
0: Sampling processing
(3) Operation of average processing specification is performed according to the
setting made for the leading edges of the initial data setting request flag
(RY(n+1)9).
POINT
(1) When performing an average processing specification, the average number of
processing or time must be set.
(2) When the average processing specification is not performed, the sampling
processing is performed regardless of the time/number of times setting.
(1) On each channel specified for average processing, the average time or average
number of times is written to the address corresponding to the channel at the
remote register address RWwm+4
At power-on, the average time and average number of times are 0.
(2) The setting ranges are as follows.
Number of times-based average processing: 1 to 10000 times
Time-based average processing: 4 to 10000ms
(3) Operation is performed according to the setting made for the leading edges of the
initial data setting request flag (RY(n+1)9).
POINT
If the set value written is outside the above range, the corresponding channel
results in error "10
average time/number of times used prior to error occurrence.
b11 b10 b9 b8
CH.4 CH.3 CH.2 CH.1 CH.8
to RWwM+B
H
, 11 " and performs A/D conversion processing using the
indicates the channel No. where the error occurred.
)
H
b7 b6 b5 b4 b3
CH.7 CH.6 CH.5 CH.4
Time/number of times
specification
1: Average time
0: Average number of times
to RWwm+B
H
.
H
MELSEC-A
b2 b1 b0
CH.3 CH.2 CH.1
)
H
3 - 19