Matrox 6150 Encoder User Manual page 49

5 In the panel, click
Actions
– Select
Rule type
– Select
Program
Protocol and Ports
– Under the remote IP address, add the IP range you want to use for your
Scope
encoders. You can use a range (such as 192.168.1.0/24) or a single IP address (such
as 192.152.168.62).
– Select
Action
– Select the network location of your system (
Profile
– Enter the name for your rule (such as Maevex Encoder Recording – ICMPv4
Name
rule).
For more information on configuring your Windows firewall, see your network
administrator.
. Configure the new rule with the following settings:
New Rule
.
Custom
.
All programs
– Under
Protocol type
.
Allow the connection
, select .
ICMPv4
,
Domain Private
Matrox Maevex Series – User Guide 49
, or ).
Public