Maevex Devices - Matrox 6150 Encoder User Manual

Maevex devices

The following are the requirements for a network firewall present on a network with a Maevex
environment.
Network Port
20,21
*
22
69
123
161
*
443
*
1900
Ephemeral
8554 (Maevex
5150), 3049
(Maevex 6100)
†
12000
* Minimum requirements.
† Fixed value when using the
feature in PowerStream Plus.
serial over IP
‡ Maevex 5150 encoder and 5150 decoder only.
Accessing your Windows Firewall settings
Note:
more information, see Windows documentation or contact your system administrator.
To access your Windows Firewall settings:
Windows 10/8.1/7 –
Windows 10 – Click
1
Firewall
Windows 8.1 – From the
Panel
configuration, these steps may be unnecessary.)
Type Inbound
TCP
TCP
UDP —
UDP
UDP
TCP
UDP
*
UDP
TCP
*
TCP
Relayed serial over IP
You may need administrator rights to modify your Windows Firewall settings. For
Start
.
Start
Network and Internet
Outbound Functionality
— FTP: File upload
SSH: Firmware update
DHCP: DHCP client
NTP: Network Time Protocol
SNMP: Network management (public
community string)
HTTPS: PowerStream Plus
— commands, and authentication and
firmware update
UPnP: Microsoft SSDP for discovery of
UPnP devices
RTP/RTCP: Audio and video streams
and control
RTSP: Streaming (configurable)
RS232: RS232 virtualization
feature in PowerStream Plus. User defined when using the
Settings Network & Internet
screen, go to
All Apps
*
Network and Sharing Center
Matrox Maevex Series – User Guide 47
‡
Ethernet Windows
Windows System Control
*. (* Depending on your
Direct