Description Of Supported Connections - Matrox 6150 Encoder User Manual

Description of supported connections

Connector
5V DC power
HDMI
HDMI In
HDMI Out
LAN1
LAN2
Line In
26 Matrox Maevex Series – User Guide
Description
Connect the 5V DC power supply included with
your product to this connector. While the 5V DC
power supply is connected to the device and
electrical socket, the power LED (
(not black).
For more information on LEDs,
5150 encoder and 5150 decoder", page
Connect a digital monitor to this connector. If
your digital monitor has a DVI connector, you
need an HDMI to DVI-D adapter to connect
your monitor to this connector.
Note: To connect to this connector, you need a
shielded HDMI cable. If your video source uses
a display resolution higher than 720p60, we
recommend you use a certified high-speed
HDMI cable.
Connect your video source to this connector.
If your video source doesn't support HDMI
output, use an HDMI adapter to connect it to
your encoder.
If your video source has a DVI connector, use
the DVI to HDMI adapter included with your
Maevex product to connect it to your encoder.
Note: To connect to this connector, you need a
shielded HDMI cable. If your video source uses
a display resolution higher than 720p60, we
recommend you use a certified high-speed
HDMI cable.
Optional – Connect a digital monitor to this
connector. If your digital monitor has a DVI
connector, you need an HDMI to DVI-D adapter
to connect your monitor to this connector.
Note: To connect to this connector, you need a
shielded HDMI cable. If the video output of your
device uses a display resolution higher than
720p60, we recommend using a certified
high-speed HDMI cable.
Connect a network cable to this connector.
Note: You can only use the second network
connector on the decoder to daisy chain the
5150 decoders.
Optional – Connect the analog audio output of
your video source to this connector. If you're
using HDMI audio input, this connector is
disabled.
Required
encoder
connection
) is active
see "Maevex
29.