Image Edge Sharpening
Parameter # F1h 98h
This feature uses an edge sharpening technique, and only applies if you set the
User. To set this parameter, scan the Image Edge Sharpening bar code, followed by three numeric bar codes in
Appendix D, Numeric Bar Codes
recommended value, scan one of the value bar codes below.
Recommended settings are:
•
Off (0) - Default
•
Low (30)
•
Med (75)
•
High (100).
Image Edge Sharpening
Low
(30)
High
(100)
that represent the image edge sharpening value. Alternatively, to set a
Imager Preferences 5 - 23
Image Enhancement
parameter to
*
Off
(0)
Medium
(75)