Scanning Sequence Examples - Motorola Symbol PL4507 Integration Manual

9 - 2 Symbol PL4507 Decoder Integration Guide

Scanning Sequence Examples

In most cases, scanning one bar code sets the parameter value. For example, to transmit bar code data without the
UPC-A check digit, simply scan the Do Not Transmit UPC-A Check Digit bar code under
Digit on page 9-15. The decoder issues a fast warble beep and the LED turns green, signifying a successful
parameter entry.
Other parameters, such as Set Length(s) for D 2 of 5 require scanning several bar codes. See the individual
parameter, such as Set Length(s) for D 2 of 5, for this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a scanning sequence, just re-scan the correct parameter.
Symbology Parameter Defaults
Table 9-1 lists the defaults for all symbologies parameters. To change any option, scan the appropriate bar code(s)
provided in the Symbologies Parameters section beginning on
NOTE See
parameters.
Symbology Default Table
Table 9-1
Disable All Symbologies
UPC/EAN
UPC-A
UPC-E
UPC-E1
EAN-8/JAN 8
EAN-13/JAN 13
Bookland EAN
Decode UPC/EAN/JAN Supplementals (2 and 5 digits)
User-Programmable Supplementals
Supplemental 1:
Supplemental 2:
UPC/EAN/JAN Supplemental Redundancy
Transmit UPC-A Check Digit
Appendix A, Standard Default Parameters
Parameter
page 9-8.
for all user preferences, hosts, and miscellaneous default
Parameter
Number
N/A N/A
01h Enable
02h Enable
0Ch Disable
04h Enable
03h Enable
53h Disable
10h Ignore
F1h 43h
F1h 44h
50h 10
28h Enable
Transmit UPC-A Check
Page
Default
Number
9-7
9-8
9-8
9-9
9-9
9-10
9-10
9-11
9-14
9-14
9-15