Table of Contents
Advertisement
9 - 86 Symbol PL4507 Decoder Integration Guide
Transmit Macro PDF Control Header
Parameter # B8h
When enabled, this activates transmission of the control header, which contains the segment index and the file ID,
in Macro PDF symbols. For example, the field may be: \92800000\725\120\343. The five digits after the \928 are
the segment index (or block index), and \725\120\343 is the file ID.
Enable this when selecting Transmit Any Symbol in Set / No Particular Order for the
Mode Symbols on page
Complete. This parameter has no effect when Passthrough All Symbols is selected.
Enable Macro PDF Control Header Transmit
Escape Characters
Parameter # E9h
This enables the backslash (\) character as an Escape character for systems that can process transmissions
containing special data sequences. Scan a bar code below to either format special data according to the GLI
(Global Label Identifier) protocol, or to disable this parameter. This parameter only affects the data portion of a
Macro PDF symbol transmission; the Macro PDF Control Header (if enabled) is always sent with GLI formatting.
GLI Protocol
9-85, and disable this when selecting Buffer All Symbols / Transmit Macro PDF When
(01h)
(02h)
*Disable Macro PDF Control Header Transmit
(00h)
*None
(00h)
Macro PDF Transmit / Decode
Advertisement
Table of Contents
