User Preferences - Motorola Symbol PL4507 Integration Manual

4 - 4 Symbol PL4507 Decoder Integration Guide

User Preferences

Set Default Parameter
You can reset the Symbol PL4507 to two types of defaults: factory defaults or custom defaults. Scan the
appropriate bar code below to reset the decoder to its default settings and/or set its current settings as custom
defaults.
•
Restore Defaults - Scan this bar code to reset all default parameters as follows.
• If you previously set custom defaults by scanning Write to Custom Defaults, scan Restore Defaults to
retrieve and restore the decoder's custom default settings.
• If you did not set custom defaults, scan Restore Defaults to restore the factory default values listed in
Table A-1.
•
Set Factory Defaults - Scan this bar code to restore the factory default values listed in
deletes any custom defaults set.
•
Write to Custom Defaults - Scan this bar code to set the current decoder settings as custom defaults. Once
set, you can recover custom default settings by scanning Restore Defaults.
*Restore Defaults
Write to Custom Defaults
Table A-1.
Set Factory Defaults
This