Presentation Snapshot By Motion - Motorola Symbol PL4507 Integration Manual

Presentation Snapshot by Motion

Parameter # F1h 87h
When the Symbol SE4500 detects an object in its field of view, and the object stops moving, it attempts to capture
a high quality image and transmit it to the host. This applies to snapshot mode only. Select a bar code below to
enable or disable this feature.
*Disable Presentation Snapshot by Motion
(00h)
Continuous Snapshot
Parameter # F1h 88h
Select Enable to stay in Snapshot Mode, and Disable to return to normal decode mode after image capture. This
only applies in Presentation Snapshot by Motion mode.
If you enable this, you can not scan parameter bar codes to exit this mode. To restore normal decode mode, power
cycle the Symbol PL4507, then scan the Disable Continuous Snapshot bar code.
*Disable Continuous Snapshot
(00h)
Imager Preferences 5 - 15
Enable Presentation Snapshot by Motion
(01h)
Enable Continuous Snapshot
(01h)