Image Edge Sharpening
Parameter # F1h 98h
This feature uses an edge sharpening technique, and only applies if you set the
parameter to User . To set this parameter, scan the Image Edge Sharpening bar code, followed by three
numeric bar codes in
Alternatively, to set a recommended value, scan one of the value bar codes below.
Recommended settings are:
•
Off (0)
•
Low (30) - Default
•
Med (75)
•
High (100).
Image Edge Sharpening
*
Low
(30)
High
(100)
Appendix D, Numeric Bar Codes
Imaging Preferences 5 - 23
that represent the image edge sharpening value.
Off
(0)
Medium
(75)
Image Enhancement