Table of Contents
Advertisement
Setup Field(s) Definitions (Continued)
Table 11-2
Parameter
Move Cursor to Last Occurrence
of String and Replace All
Skip to End
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Move Cursor
Scan a bar code below to move the cursor in relation to a specified character. Then enter a character by scanning
a bar code from the
Alphanumeric Keyboard on page
NOTE If there is no match when the rule is interpreted and the rule fails, the next rule is checked.
Move Cursor To Character
This action replaces all occurrences of a selected string with another
user-defined string, and moves the cursor to the beginning of the last
occurrence. Scan
Move Cursor to Last Occurrence of String and
Replace
All, then enter an alphanumeric string representing the
character(s) (up to 10) to match and delete using the
Keyboard. Scan the
End of
string representing the character(s) (up to 10) to insert using the
Alphanumeric
Keyboard. Scan
Scan
Skip to End
to move the cursor to the end of the data.
Scan one of these bar codes to select the number of positions ahead
to move the cursor.
Scan one of these bar codes to select the number of positions back to
move the cursor.
Send Values 1 through 6 by scanning the appropriate bar code. These
values must be set using the prefix/suffix values in
7-19.
Value 1 = Scan Suffix
Value 2 = Scan Prefix
Values 3-6 are not applicable
11-91.
Advanced Data Formatting
Description
Alphanumeric
Message. Enter another alphanumeric
End of
Message.
Table 7-4 on page
Move Cursor To Start
11 - 31
Page
11-32
11-32
11-33
11-34
11-34
Advertisement
Table of Contents
