Motorola Symbol PL4507 Integration Manual page 385

Table of Contents

Advertisement

AIM Code Modifier Characters (Continued)
Table B-2
Code Type
Option Value
PDF417,
0
Micro PDF417
1
2
3
4
5
Example: A PDF417 bar code ABCD, with no transmission protocol enabled, is transmitted as
]L2ABCD.
Data Matrix
0
1
2
3
4
5
6
MaxiCode
0
1
2
3
Reader set to conform to protocol defined in 1994 PDF417 symbology
specifications. Note: When this option is transmitted, the receiver cannot
reliably determine whether ECIs have been invoked or whether data byte
92
has been doubled in transmission.
DEC
Reader set to follow the ECI protocol (Extended Channel Interpretation). All
data characters 92
are doubled.
DEC
Reader set for Basic Channel operation (no escape character transmission
protocol). Data characters 92
are set to this mode, unbuffered Macro symbols and symbols requiring the
decoder to convey ECI escape sequences cannot be transmitted.
The bar code contains a GS1-128 symbol, and the first codeword is
903-907, 912, 914, 915.
The bar code contains a GS1-128 symbol, and the first codeword is in the
range 908-909.
The bar code contains a GS1-128 symbol, and the first codeword is in the
range 910-911.
ECC 000-140, not supported.
ECC 200.
ECC 200, FNC1 in first or fifth position.
ECC 200, FNC1 in second or sixth position.
ECC 200, ECI protocol implemented.
ECC 200, FNC1 in first or fifth position, ECI protocol implemented.
ECC 200, FNC1 in second or sixth position, ECI protocol implemented.
Symbol in Mode 4 or 5.
Symbol in Mode 2 or 3.
Symbol in Mode 4 or 5, ECI protocol implemented.
Symbol in Mode 2 or 3, ECI protocol implemented in secondary message.
Programming Reference
Option
are not doubled. Note: When decoders
DEC
B - 5

Advertisement

Table of Contents
loading

Table of Contents