Table of Contents
Advertisement
10 - 4 Symbol PL4507 Decoder Integration Guide
Prefix/Suffix Values
For SSI Hosts:
Parameter # P = 69h, S1 = 68h, S2 = 6Ah
For Non-SSI Hosts:
Key Category Parameter # P = 63h, S1 = 62h, S2 = 64h
Decimal Value Parameter # P = 69h, S1 = 68h, S2 = 6Ah
A prefix and/or one or two suffixes can be appended to scan data for use in data editing. To set a value for a prefix
or suffix, scan a prefix or suffix bar code below, then scan a four-digit number (i.e., four bar codes from
Numeric Bar
Codes) that corresponds to that value. See
an error or change a selection, scan
NOTE To use Prefix/Suffix values, first set the
For non-SSI hosts, when using host commands to set the prefix or suffix , set the key category parameter
to 1, then set the 3-digit decimal value. See
Scan Prefix
Scan Suffix 2
Cancel on page
(07h)
(08h)
Table E-1 on page E-1
D-3.
Scan Data Transmission Format on page
Table E-1 on page E-1
for the four-digit codes.
Scan Suffix 1
Appendix D,
for the four-digit codes. To correct
10-5.
(06h)
Advertisement
Table of Contents
