Rts Line State - Motorola Symbol PL4507 Integration Manual

7 - 16 Symbol PL4507 Decoder Integration Guide

RTS Line State

This parameter sets the idle state of the Serial Host RTS line. Scan a bar code below to select Low RTS or High
RTS line state.
*
Host: Low RTS
Beep on <BEL>
When this parameter is enabled, the decoder issues a beep when it detects a <BEL> character on the serial line.
<BEL> gains a user's attention to an illegal entry or other important event.
Beep On <BEL> Character
(Enable)
NOTE A NULL character must be sent to the decoder before BEL to ensure the BEL character is processed
correctly.
Host: High RTS
*
Do Not Beep On <BEL> Character
(Disable)