Image Brightness (Target White) - Motorola Symbol PL4507 Integration Manual

Image Brightness (Target White)

Parameter # F0h 86h
This parameter sets the Target White value used in Snapshot and Video modes when using autoexposure. White
and black are defined as 255 decimal and 0, respectively. Setting the value to the default of 180 results in a white
level of ~180 for the image.
To set the Image Brightness parameter, scan Image Brightness below followed by three numeric bar codes
representing the value. Include leading zeros. For example, to set an Image Brightness value of 99, scan 0, 9, 9.
See Appendix D, Numeric Bar Codes
*
180
for numeric bar codes.
Imager Preferences 5 - 19
Image Brightness
(3 digits)