Table of Contents
Advertisement
Image 5-4
Stand-still monitoring
5.2.25 DR3 - Waiting time for stand-still 1
To prevent the necessity of having to cancel a weighing instruction (only taring,
printing and zero setting in static operation) when the stable weight of the scale is
not defined, the waiting time is given for stand-still 1. Only the scale instruction
tare, output log or zero setting was not possible after this time has elapsed is the
corresponding technology message generated.
5.2.26 DR3 - Maximum negative weight for zero setting at start-up
Zero setting means automatic zero setting on the scale when the power supply is
switched on.
If the zero setting when switching on the supply voltage has been activated then
the definition will limit the affect of the function. The reference point for the
effectiveness of the limitation is not the current weight, it is the weight that was
displayed by the scale without a previous zero setting.
SIWAREX FTA
Weighing Functions
5-55
Advertisement
Table of Contents
