Table of Contents
Advertisement
Messages and Diagnostics
Error
Data and
No.
command errors -
description
35-
Interface
42
parameter error
35
Baud rate not
permitted for
RS232
36
Process alarm
assignment or
process value
assignment
implausible
37
Baud rate not
defined for RS485
38
39
40
41
42
43-
Trace not possible
50
43
Trace task not
possible since
MMC full
44
Trace task cannot
be executed, since
MMC is defective or
non-existent
45
Trace recording
cycle too small
46
47
48
49
50
51
51
52
53
54
55
56-
Log text not
62
plausible
56
Log text too long
57
Log text contains
fields that are not
permitted
7-142
Solution
The baud rate for the RS232 interface is not permitted. Define
the baud rate.
The assignment of the process alarm or the process values in
DR7 for the S7 interface is incorrect. Change your assignment.
The baud rate for the RS485 interface is not defined. Define the
baud rate.
Reserved
Reserved
Reserved
Reserved
Reserved
The trace cycle in DR7 is too short. Define parameters for
a longer trace cycle (for MMC minimum 5 x 10 msec).
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
The log text with the fill parameters is too long of the end
character (EOT) is missing. Change the log text.
Ensure that the proper number of characters for the
corresponding field are used in place of the respective print field
code. The overall length of the text filled with values may not
exceed 160 characters (including printer control character but not
the terminating EOT).
Log text contains fields that are not permitted Change the log
text.
SIWAREX FTA
Advertisement
Table of Contents
