Table of Contents
Advertisement
10.5 Recorder
Online parameter curves can be recorded and played back using the recorder
function located at the top right-hand edge of SIWATOOL. The data records that
are to be recorded can be selected and the save parameters set using the
"Configure recorder" button. The playback speed can be set using a slider.
10.6 Assistance
After clicking on a data record in the left-hand program window, the "Info" card can
be selected from the right-hand program window. A description on a white area
indicates the affect that the data record has on the scale's behaviour.
After selecting a card, a section of the respective data record is displayed as input
and output fields. Besides the parameter identification, Tool Tips (text is displayed
when the mouse is over the field) help to describe the parameter.
Clicking on the menu point "Help" opens the "SIWAREX FTA" manual. The Acrobat
Reader program must be installed in order to read the manual.
10.7 Commissioning - Wizard
Entering the parameter in SIWATOOL FTA can easily be done quicker. By entering
the scale type and the weighing range (only suitable for scales with one weighing
range), certain parameters are automatically assigned with calculated values by
the program Wizard.
The parameters that are changed this way can be seen in the description of data
records DR3, DR4, DR20, DR21, DR22, DR23 in column "default".
The weighing range defined in the Wizard is not automatically defined in the
adjustment data of the DR3 for safety reasons.
SIWAREX FTA
Commissioning using a PC – SIWATOOL FTA
10-175
Advertisement
Table of Contents
