Dr 32 - Total Number Of Weighing Procedures - Siemens SIWAREX FTA Device Manual

Weighing Functions
Name
Statistic data
Total number of
weightings
Number of control weighs
Number of weighing
procedures over TO2
No. weigh procedures over
TO1
Number of weighing
procedures good
No. weigh procedures
under TU1
No. weigh procedures
under TU2
Number of weighing
procedures bad
Reserve 0
Reserve 1
Set weight
Average value of net
weight
Standard deviation of net
weights
Performance per hour
Weighing procedures per
hour
Table 5-22 DR 32 Allocation

5.21.1 DR 32 - Total number of weighing procedures

Number of weighings since the last statistic data deletion. The number of single fills
is determined in all operating modes.
5.21.2 DR 32 - Number of control weighs
The number of weighings in which a tolerance check has been performed. In
operating modes with totalizing (AWI totalizing and AWI gravimetric big bag),
the total loadings are counted.
5-116
Type Address Range of Values / Explanation
DINT DBD000 Number of weighing procedures (with and
without tolerance check)
DINT DBD004 Number of weighing procedures with
tolerance check
DINT DBD008 Number of weighing procedures with
tolerance check over tolerance limit TO2
DINT DBD012 Number of weighing procedures with
tolerance check over tolerance limit TO1
DINT DBD016 Number of weighing procedures with
tolerance check within tolerance limits TU1
to TO1.
DINT DBD020 Number of weighing procedures with
tolerance check under tolerance limit TU1
DINT DBD024 Number of weighing procedures with
tolerance check under tolerance limit TU2
DINT DBD028 Number of weighing procedures with
tolerance check outside tolerance limits TU2
or TO2
DINT DBD032 Reserve 0
DINT DBD036 Reserve 1
REAL DBD040 Current set weight (calibratable numeral
step,
with AWI application and country code
"OIML" rounded to the corresponding
numeral step)
REAL DBB044 Average value of the net weights checked
for tolerance errors
REAL DBB048 Standard deviation of the net weights
checked for tolerance errors
REAL DBB052 Performance per hour [e.g. g/h, kg/h or t/h]
is projected based on the net weight of the
last weighing procedure.
INT DBW056 Weighing procedures per hour projected
based on the last weighing procedure (time
for one weighing cycle).
58
Reference
SIWAREX FTA