Setting The End; Setting The Duration - AEG BPE642020M User Manual

Clock function
SET+GO
MINUTE MINDER
00:00 COUNT UP TIMER
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch or
2. Touch or
3. Touch or
4. Touch or
The display shows the new time.
To change the time of day touch
again and again until

7.3 Setting the DURATION

1. Set a heating function and
temperature.
2. Press again and again until
starts to flash.
3. Use or to set the minutes for
DURATION time.
4. Press or the DURATION time
starts automatically after 5 seconds.
5. Use or to set the hours for
DURATION time.
6. Press
. The DURATION time starts
automatically after 5 seconds.
When the set time ends, the signal
sounds for 2 minutes.
setting flash in the display. The oven
turns off.
7. Press a sensor field or open the oven
door to stop the signal.
8. Turn off the oven.
Application
To turn on the oven with necessary settings with only
one press of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the oven is off.
To set the count up, which shows how long the oven
works. This function has no effect on the operation of
the oven. It is on immediately when the oven starts to
heat. The COUNT UP TIMER is not turned on if DURA-
TION and END are set.
and 12:00.
to set the hours.
.
to set the minutes.
.
starts to flash.
and time

7.4 Setting the END

1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the END and
or to confirm. First you set the
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch again and again until
starts to flash.
3. Use or to set the minutes for
DURATION.
4. Touch .
5. Use
or to set the hours for
DURATION.
6. Touch , the appliance switches to
the setting of the END function.
The display shows flashing
ENGLISH 13
and the
.